Home > categories > Consumer Electronics > TV Receivers > How small satellite TV receiver without signal
Question:

How small satellite TV receiver without signal

Is a signal that shows that none of the 001 screens are interrupted without a single screen

Answer:

You won't be considerate enough to buy the new one
If the 001 signal is interrupted by the screen!There are several cases, one, you broke the tuner!!Two, the TV receiver tuner connected and disconnected line,1, maybe your line is old and the lines are disconnected!!2, in line with tuner or receiver and the ends of the F head interface is not connected!!Three, the ability to receive the pot by the weather is bad, when the weather is bad, will also be the case!!
The pot missed the satellite. The present satellite TV receiver has been stored in the aircraft prior to leaving the factory, and it is not necessary to search the station when it is installed. If the installation: connect the line to the TV pot to adjust to the AV mode, press the menu button to open the receiver (or directly by adjusting the star key or F3) and then transferred to the system settings and press the confirm button to enter the password again '0000' or '9999' to press the enter key, see sub menu "installed and in signal detection. The lower right corner of the screen is two line display signal strength and signal quality for two color, and then around the adjustable elevation and side pot placed southwest slowly up and down, the numerical signal quality to maximum fixed pot and see TV tuner, can press the eject button (because the receiving machine factory orders have existing machine pre season inside, not recovery) according to factory settings and automatic search, because the satellite is not aligned in the pot when absolutely not search programs, but the original pre program parameters will also be removed.

Share to: