How to adjust the solar controller
The controller is designed for solar DC power supply system, solar DC street lamp system design, and the use of a dedicated computer chip intelligent controller. Use a one-touch touch switch to complete all operations and settings. With full short-circuit, overload, unique anti-reverse protection, full, over-automatic shutdown, recovery and other full-function protection measures, detailed charge instructions, battery status, load and a variety of fault instructions.
Solar controller mode: 1, pure light control mode: when there is no sunlight, the light intensity dropped to the starting point, the controller delay 10 minutes to confirm the start signal, according to set the parameters to open the load, the load began to work; when there is sunlight , The light rises to the start point, the controller delay 10 minutes to confirm the closure of the signal after the closure of the output, the load stops working.
Battery status indication: When the battery voltage is in the normal range, the status indicator (2) is green; if the status indicator is green slow flashing; when the battery voltage drops to undervoltage, the status indicator turns orange; when the battery When the voltage continues to decrease to the overdischarge voltage, the status indicator (2) turns red, and the controller will automatically turn off the output to remind the user to replenish the power in time. When the battery voltage returns to normal operating range, the output enable operation is automatically enabled and the status indicator (2) turns green
Charging and overpressure indication: When the system is connected normally and the sun is exposed to the photovoltaic panel, the charging indicator (1) is green, indicating that the system charging circuit is normal; when the charging indicator (1) Description of the system over-voltage, the treatment see the fault handling content; charging process using the PWM method, if there have been over-discharge action, the charge must first increase the charging voltage, and keep 10 minutes, and then down to the direct charge voltage, Live activation of the battery, to avoid sulfide crystallization, and finally dropped to the float voltage, and keep the float voltage. If there is no over-discharge, there will be no way to enhance the charge to prevent the battery water loss. These automatic control processes will allow the battery to achieve the best charging effect and to ensure or extend its service life.
The controller through the computer chip on the battery terminal voltage, discharge current, ambient temperature and other parameters related to the battery capacity of the sample, through the special control model calculation, to achieve the characteristics of the battery discharge rate, temperature compensation correction of high efficiency, high accuracy rate control , And adopted a high efficiency PWM battery charging mode, to ensure that the battery work in the best condition, greatly extending the battery life. With a variety of work patterns, output mode selection, to meet the various needs of users.
