Home > categories > Electrical Equipment & Supplies > Power Cables > How to determine whether the square of the cable is standard
Question:

How to determine whether the square of the cable is standard

How to choose the type of street lamp cable specifications, anxious

Answer:

Depends on your number is not arranged in order, the general building room when the patch panel and the user board number is one to one correspondence
laying the dark tube should be used when the steel pipe or flame retardant PVC pipe
Horizontal laying of the cable within the cable, generally do not need fixed, natural laying can be. Vertical laying section of the cable within the bridge, with the need to match the line card, the use of tied rope (multi-purpose single insulated wire) one by one fixed cable, fixed spacing should meet the requirements. According to the control cable and the power of the different layers of laying, if the power cable to be multi-layer need to have 300mm spacing (or load capacity is large enough), if it is control cable, casually laying, if the laying of power cable laying below Layer, above the laying of control cable, but not too much affect the power cable cooling. If the high-voltage cable and low-voltage cable in principle do not allow common laying.

Share to: