Identification method: floor surface with sandpaper or sawed floor look after the end will be showing the color is very serious.The adapter plate: some line plate of tailing, and different length of the floor plate by the finger joint splicing process and acts as a pure solid wood flooring sales to deceive consumers. This kind of floor because of the use of a large number of bonding glue, formaldehyde content is not high environmental protection, but also due to uneven stress in the floor easily lead to deformation, cracking.
Color: wood core material and sapwood transition part of wood material, floor surface by using color or special coloring treatment, eliminate the color difference between the sapwood and core material, as a high-quality solid wood flooring sales to deceive consumers. The sapwood and core material of air dry density, moisture content, wood hardness is not the same, easy to cause the floor arch deformation and cracking of a series of quality problems.
Panel: in the poor quality of solid wood substrate affixed to 0.05mm - 2mm thickness of solid wood veneer, in order to act as a pure solid wood flooring sales to deceive consumers. Because of this kind of floor from the substrate due to inferior quality is not stable, and will use the inferior wood veneer and pressed together with adhesive, easy to cause the peeling veneer and the substrate, and the existence of a formaldehyde content is not environmental protection.Identification method: can be observed through the comparison of the floor surface and the bottom of the identification, the surface of the wood floor and the ground is basically the same, and the panel is completely different.
