Home > categories > Electrical Equipment & Supplies > Power Cables > How to install gps power cable to 2007 4runner?
Question:

How to install gps power cable to 2007 4runner?

I bought a Garmin GPS, but my cigarette lighter is near my gear shift. Does anyone know how to add a power cable so the cable is behind the gps on the window?. I can always take it somewhere for about $100.

Answer:

As you say, take it so it is professionally done. Working on cars is very complex and requires an expert. Always best to seek a professional. Also always it is require to capitalize the acronyms of titles. Please capitalize GPS 100% of the time.
Here's what you can do. Assuming that the Garmin has a MICRO USB port on the back, get a MICRO and MINI USB cable from Tiger electronics. The cable will have MICRO on one end, and MINI on the other. Next, get a Belkin USB adapter for a cigarette lighter. Next, go to a car stereo shop, and get a FEMALE end of a 12 volt power supply Next, get an add a circuit fusible tap (make sure you note if you have mini or regular blade fuses), get the right one. Using your owner's manual, find a fuse circuit that is switchable by ignition (the cigarette lighter one would work). Pull that fuse, and make sure you have the another one for the add a circuit. 12-18 is always best. Crimp the add a circuit tap to the female end of the 12 volt power supply. Find a clean ground, usually a screw on the fuseblock. Attach the ground wire using a loop spade tighten the screw down. Reinstall the add a circuit Turn ignition on, GPS should work Clean up the cable usually around the trim where the windshield meets the frame.

Share to: