First, the construction of the ground: 1, cleaning the ground and pavement 2-3 cm thick squeeze Schomburg plate 2, according to need to tailor the electrothermal film, side by side pavement electrothermal film 3, parallel connection electric heating film (according to the standard of construction connection drawings connected, single electrothermal membrane does not exceed 10 meters) 4, using special tool will be special pinch the child with the electrothermal film metal loading bar is firm in connection and connect the wire 5, with insulation mortar will connect parts of the overall package, fully waterproof insulation. 6. The air switch should be configurated according to the general power, and connect the thermostat, the sensor, the sensor probe into the ground is the most easy to heat area to avoid overheating of the heating film. 7. The sensor added the casing and the drive pipe would be cut in the head of the sensor. To paste it on the electric thermal film with the help of the insulating plaster. 8. Make a comprehensive review of the 9 with waterproof cloth will electrothermal film package (cement construction) or pavement non-woven (floor or the floor sheet construction) 10, start thermostat measured temperature rise 11, pavement geothermal plastics net, pour cement mortar, inlaid tiles (cement construction), shop floor (floor construction) 12, the construction is completed
Electrothermal film is provided with a different form, depending on various projects to select installation method, installation has three forms of films, wall film, film, below the main talk about installed under the ground. 1. Electrothermal membrane mounted on the ground (electrothermal mulching film) The ground installation of electrothermal?film is the most scientific installation, and the best heating method from the pointview of heat transfer theory. From the health perspective, the heat is from the bottom to the top in line with human's physiological needs of "foot temperature and a cool head ". The ground installation of electrothermal membrane can not only make people feel more comfortable, and can increase the use of space area. It can fully guarantee the uniform temperature zone, but because of the different pattern of each family, furniture and goods display different, in the design and installation of the way to fully consider the degree of difficulty of the Limited space and construction, to ensure that the installation of electric heating film in the process of barrier free, make the electrothermal film heating system more safe and reasonable, reduce the cost of expenditure. The main construction is floor, heat insulating layer, electrothermal?film, structural layer, decorative layer and so on, the quantitaive value of the structural layer, decorative layer and composite thermal resistance should be low to the stadard. 2. The caculation of heat load design on the installation of the electric heating film on the ground generally take use of the the following several methods. The calculation of the heat load, calculating the thermal power of each room and then converted wattage of electrothermal?film. The calculation of the heat load calculation should be carried out by professionals. This method can be applied to large projects.
