How to install the kitchen aluminum plate
You have already installed the ceiling, you can first turn off the total power switch, and then connected to the line, then the lamp two buckle erected, aligned openings, until the raised buckle into the hole inside, and then The top of the lamp, the buckle will naturally stuck in the buckle plate, so that the installation of a successful.
General buckle with a dedicated keel, keel for galvanized steel and paint steel, the standard length: 3000MM. The
1, according to the same level of height installed edge collection series.
2, according to the appropriate spacing hoisting light steel keel (38 or 50 keel), the general spacing of 1-1.2 meters, the distance from the provisions of light steel keel distribution.
3, the pre-installed in the buckle keel hanging pieces, together with the buckle keel close to the light steel keel and light steel keel in the vertical direction buckle in the light steel keel below the girdle keel spacing is generally 1 meter, all Bahrain must Adjust the level (in general, the vertical distance between the building and the aluminum plate to be lifted does not exceed 600MM, do not need the middle plus 38 keel or 50 keel, and the use of keel hanging pieces and plug directly connected).
4, the buckle in parallel with the order of parallel buckle in supporting the keel, the buckle board connection with a special keel series connection connection.
5, the board must be installed with gloves, such as accidentally leave fingerprints or stains can be washed with detergent after cleaning can be dry, a good installation process easy to disassemble.
