Question:

How to laminate the floor

How to laminate the floor?

Answer:

It is recommended that you do ground floor treatment. Method is: playing keel leveling, and then laying a large core board, and then shop composite floor! If the use of cement leveling, raising the ground does not say, but also increase the weight of the floor, if leveling the cement layer is too thick, short time the ground dry through, the water is not completely distributed, so easy to cause composite floor expansion, drums. If the ground is relatively flat suggested that you do not make any treatment, pavement can be
Third floor, seven install, it can be seen, how to shop composite floor, composite floor, how to shop is a very important thing. When the floor in the shop when the floor, should pay attention to what? The following is the sub-Aubian Xiaobian summary of the pavement composite floor when the main note: 1, guard pole Gua Gua Gai Ge Geng Kung grass base should be smooth, solid , Dry, clean, non-polluting, strength to meet the design requirements. 2, in the bottom of the building or cottage pavement to be moisture-proof treatment. 3, to strengthen the composite floor pavement, the indoor temperature should be in accordance with the provisions of the product specification requirements. 4, the bottom of the floor should be full of moisture at the end of the pad, pavement formation, seams can not be laminated, and fixed with tape. 5, the installation of the first row of the floor when the groove should be facing the wall, between the floor and the wall left about 10mm gap. 6, the room length or width of more than 8m need to set the expansion joints, install the pressure bar. 7, wooden skirting board with 45 degrees groove tight adhesion, height, wall thickness of the same, fixed nail cap is not exposed. 8, the surface straight, color, grain coherent, clean without glue marks.

Share to: