How to make the best sound effects in the home theater?
You should also select the sound processing program correctly:PROLOGIC, AC-3, DTS, or a variety of CINEMA DSP (Theater digital sound processor), whether to choose the right, for the right, for good surround sound effects.
Some components need to use a different connection terminal connection and the name is not the same, such as COAXIAL (Tong Zhou), OPTICAL (optical fiber), S-VIDEO (S video), VIDEO (video), AUDIO (audio), each terminal and IN (input) and OUT (output) of the other, must ensure that the correct connection between different categories, input and output terminal, which is a prerequisite for normal operation of the system. 2, the correct selection and setting work mode (1) (INPUT MODE) input mode selection amplifier generally have a wide choice of input patterns, such as AUTO (automatic), ANALOG (Analog), DTS (Digital Theater System), to correctly select the input mode in order to make the system play the best performance according to the type of broadcast program source. The choice of the optimal signal order: digital signal digital signal to Dolby digital or DTS encoding the common analog signal (PCM), (ANALOG); the input mode is set to AUTO (auto) position, the input signal from a signal source in the following order of priority selection: COAXAL (coaxial), OPTICAL (terminal fiber) and ANALOG (Analog) terminal terminal. Note: some patterns are mutually exclusive, and improper selection can cause the system to fail. The user must read the instructions carefully before using the amplifier. (2) the sound mode is chosen by using the EFFECT (sound effects) switch correctly. In the system play a standard stereo audio source such as a CD record or double track tape programs best off sound speaker (mid and rear), in order to get the authentic sound effects; in watching movies or playing the encoding program source is the correct choice of audio processing program:
3, the establishment and adjustment of the loudspeaker system when the system works in the home theater surround mode, surround sound effect and in addition to the quality and performance of the speaker system itself is related to whether correctly setting and adjustment is also an important factor can not be ignored. (1) setting the speaker working mode according to the system configuration, the size of the speaker (speaker) are set correctly, the center speaker (CENTER SP), rear speakers (REAR SP), the main speaker (MAIN SP) and subwoofer output (BASS OUT), which is in the appropriate state. In speaker mode (CENTER MODE) are generally three types: ordinary (NORMAL) mode for the performance of moderate size, the smaller the speakers; wide (WIDE) mode for the speakers and lead the box band, bearing power and other indicators of a phantom; (PHANTOM) model -- system do not configure the speakers used this mode. In the use of some AV amplifiers, the three modes are often referred to as SML (small speaker), LRG (large speaker), NONE (no speaker), but the choice principle is the same as above. Similarly, the main speakers and post speakers also choose the right mode of work in terms of their size and performance. The subwoofer has two different modes of choice based on whether or not the subwoofer is connected. In addition, there are two modes: 3CH (three channel mode) - omitted rear surround speakers, retaining only the front, rear speakers: OFF output -- mid and surround channels closed, suitable for broadcast standard stereo audio source, such as the CD disc.
