Home > categories > Construction & Real Estate > Wash Basin > How to paste the tiles
Question:

How to paste the tiles

How to paste the tiles

Answer:

The basin is finished after the brick to do the brick, all the stickers do not leave blank, when the installation of the basin and then punch, as long as you buy the brick is not too time will not be damaged
Called the repair staff posted on OK friends
Brick washing table 7, installation doors: cabinet with solid wood, PVC board and other materials, prices are also different. Solid wood texture of the door and good environmental protection, but the price of your side. PVC material is more affordable.
Brick washing table 4, increase the storage function: If you want to wash the toilet turned into the cement cabinet, you can use brick to form the column, the cabinet with tiles to do the shelf. Brick washbasin 5, paving tiles: cement tiles on the paving tiles, you can use slanting, or the use of different specifications, different colors of the tiles for the combination of paving. This will be better decorative effect. Brick washstand 6, the installation of hand basin: After the installation of the wash basin, the water pipe should be connected to check whether the water leakage. The current market wash basin in addition to the ordinary style, as well as European and blue and white porcelain Chinese style style.
Brick washbasin steps: Brick washstand 1, to determine the size: according to the size of the space to determine the width and height of the toilet. In general, the height is 65 cm, the width of the table below 50 cm. Brick washbasin 2, the construction method: brick washing machine mainly by the two construction methods. The first, with brick masonry frame and table, and then play on the brick surface steel keel, cementing mortar on the keel, and then paste the tiles. The second, the use of angle to do the structural framework, in the above plus cement pressure plate, and then paste tiles. Brick washing table 3, making table: to reduce the amount of brick, saving space. You can directly use cement to make the table, rather than the brick to do the support column. Such as the steel directly into the wall, with the vertical line will be flat steel bars, into the cement slurry, made of countertops.

Share to: