How to properly connect the computer UPS uninterruptible power supply ah?
If the computer running the data to determine the importance of the computer without UPS, if you do not have to set the computer itself; if you can directly use the computer host and monitor the power input plug inserted in the UPS output socket, UPS power input access to electricity can!
Low power (5KVA below) UPS power supply, are generally single-phase input, single-phase output, input and output are socket form, according to the instructions and the socket board can be connected to the connection, if there is a communication connection needs , Can be directly connected to the communication line, install the accompanying communication software or computer content of the applicable software can be
The computer generally has two local electricity 1. Host 2 monitor, plug this plug directly into the UPS output on the OK, UPS has an input power cord, plug directly into the wall on the board OK
General pc with ups have two output, you can connect the monitor and the host's power cord there, the ups of the input line connected to the mains. Can also be connected in the output of a plug-in board, 500w with two computers no problem, our units are with two.
Connect the computer to the UPS uninterruptible power supply:
1, the UPS power cord into the plug-in board.
2, the computer's power cord into the back of the socket on the UPS.
3, open the plug-in switch, open the UPS power switch.
4, the computer boot.
So that the computer can work with the UPS power supply, and power failure after the UPS can still give the computer power for some time.
