Home > categories > Construction & Real Estate > Geomembranes > How to put up membrane on the laptop?
Question:

How to put up membrane on the laptop?

nan

Answer:

For the laptop protective film pasting, after wiping the screen clean with a cotton cloth, you can first peel off a corner of the protective film, and aligh the corner with a corner of the screen and paste it well. Peel off the film slowly and paste the film bit by bit with the cotton cloth in the hand. In the process of pasting, you should be careful not to let the air go into the space between the film and the screen. After pasting is finished finally, wipe the whole screen parallelly and it is done.
Membrane pasting steps: 1. Align the membrane surface marked 1 with the screen, pull its release liner label and peel off part of it slowly. Please note that don't let your fingers touch the adsorbed layer (interlayer) of the protective film. 2. Aligh the adsorbed layer with the four corners of the screen and ensure the alignment. While peeling off the release liner of the backing layer marked 1, smooth it carefully. For the protective film now has automatic electrostatic adsorption function, generally it does not require much smoothing. When putting up membrane, you should be slow in motion. It is suggested that you should start pasting from the long side of the screen, from points to lines, and from lines to dimension in sequence.
First, the membrane should be of good quality and smooth. For the membrane bought from stall at the price of 5 yuan, it is impossible to expect there is no bubbles appearing after pasting. Second, clean the sceen thoroughly and make sure there is no dust on it. Third, when you put up the membrane, you should start steady and do it slowly. Fourth, if it is not very successful and few small bubbles appear, you can use a soft cloth (such as glasses cloth) to push out them gently.

Share to: