Home > categories > Transportation > Raft > How to repair a rubber boat cleft?
Question:

How to repair a rubber boat cleft?

How to repair a rubber boat cleft?

Answer:

You can use a thick point of transparent food, plastic bags coated with latex, tightly pressed with things, during which time can not be inflated, after drying, and then plastic bag on a layer of transparent tape, my rubber boat so repair!
Cut out a piece of bicycle tire than wound, but also should be combined with the cut side of the rough (hand in the process to clean, do not have oil) then, in the cut top and tube coated (once the glue is polished) do not be too thick, a thin layer can, should be uniform. Finally, but also the most critical, after the completion of the glue must be placed for 5-10 minutes, depending on the degree of dry weather, placed in the process to avoid dust, do not be impatient to try to touch the hand, see if the glue is solidified, avoid by all means. At the time, put them on a beat by butt, pressure. Right away, OK.
Once buy bottles, a bicycle tire, sandpaper. The rubber dinghy is sanded off near the end of the line, so it must be worn off as smooth as possible. The rougher the better.

Share to: