I have two DVC subs and I know how to wire them down to 1 ohm with the wires coming out of one outlet on the box but I don't know how to wire them down to 1 ohm with wires coming out of both sides of the box. Anyone have a wiring diagram for this?
For okorder /... On the inside of the enclosure, connect both positives and both negatives to the enclosure inside terminal. That makes each side of the enclosure 2 ohms. Mount and screw in the subs. Now, on the outside: 1) Observing polarity, run short jumpers between the terminals (positive to positive, negative to negative) and then connect ONE set of terminals to the amp (again observing polarity) (positive to positive, negative to negative. 2) Run separate wires from each set of terminals to the amp, observing polarity. That makes the final impedance to the amp 1 ohm.
