Ice machine ice is not thick on the ice how to do?
4, condensate problemsIt is found that the amount of condensate is too high, and there is still condensate in the water when defrosting. This is as long as the pressure regulating valve, so that the water can be solved a little smaller.5, defrost valve does not openFound that the defrost valve is not open, first defrost valve 220V power, see if it can be opened, if it can be opened, it is a computer board fault. Unable to open where the defrost valve fails and replace the valve.Most ice machines do not take off ice mostly because of the above reasons, so users of such problems can be checked step by step according to the above steps.
2, ice machine, ice dish is too dirtyIce dish is too dirty, cleaning should pay attention to the use of detergent, usually with grams and acid liquid cleaning ice plate. This will make the ice pan clean.Plastic parts 3, ice machine ice or ice tray and metal sealing off on the side of a split apartIf the ice machine ice front ice desoldering, directly to a sealed off. If it is the opposite of copper desoldering, see replacing the ice tray. If it can be repaired and welded well, consider welding. If there is a split between the ice pan metal and the plastic on the edge, it is necessary to remove the gel from the opening.
The ice machine off the ice is what reason: many users in the use of ice machine ice machine in the process, appeared off the ice, so the ice machine is generally years older, we find the ice machine off the ice is what reason and solve it.1, the ice is too thinThe ice is too thin, often so that ice has not dropped, it all on the ice tray, from the new to do a plate. We can solve the problem of "ice is too thin" by this method; adjust the ice maker thick ice probe; if the screw is adjusted, screw the screws inwards and then thicken the ice. That is, the thickness of the ice probe iron plate away from the ice plate, not block the more thick, but the thinner.
