Installation of external wall insulation decorative panels need to pay attention to what the details of the problem

Answer:

The quality of life is not just a space experience, the visual beauty also need to be considerate of the wisdom brought about by the convenience and comfort! Today you choose to add a smart home decoration elements, then a little bit, you will find the quality of life has leap to another level!

After the completion of each piece of finished plate paste, should immediately install the anchor, the anchor should be installed from the middle of 300-500mm gap installed, the effective depth of the screw into the solid wall 50mm.

First, the deployment of uniform mortar with a scraper on the back of the finished plate, and then hand the plate pressed to the wall; then sucker sucked on the surface of the plate, with a suction cup to adjust the position of the finished plate; Check the flatness of the attached plate with the ruler and the level so that the overall board is flat and aligned.

According to the design of the design of the split map to determine the horizontal direction of the baseline, and according to the drawings and the size of the template to determine the vertical control line, the baseline required closed loop to determine the horizontal rubber band.

A. wall of the cement mortar has a certain strength, the surface should be clean without dust, no oil traces, no moss and other impurities B. surface no hollowing, from the sand, stripping, blasting and so on C. The flatness of the wall, the angle of the big angle, the straightness of the window line and other comprehensive requirements to meet the intermediate plaster standard D. windowsill, cornice, decorative lines, parapet pressure and other parts of the top, there must be slope