Interior wall laying fiber mesh cloth, what matters should pay attention to plastering? Is it not allowed to lap when laying mesh cloth?
Before construction, do a good job of watering walls, wet and beat, the fiber network overlap of not less than 100mm, the corner of the door should be laid, so that the grid is not exposed.
Outer plastering surface cracksSome paste polystyrene board external insulation project in a short time after the completion of the inner wall plastering crack surface, especially on the polystyrene board of transverse and longitudinal seams, horizontal cracks and longitudinal cracks tend to produce longer. According to the analysis, the reasons of crack in a plaster mortar here is thick, and the lack of flexibility of mortar, shrinkage, self shrinkage caused by crack; another reason comes from the polystyrene board, some construction units on the properties of polystyrene board and use requirement is not very understanding, so pull the surface layer. In addition to affecting the appearance of buildings, the surface cracks affect the protective surface more seriously, affect the use of functions, and shorten the service life.
Note: when cleaning is not too hard, not with a sharp object (steel ball) friction, the key is usually protected, do not use too much water to air, humidity should be moderate, pay attention to maintenance, let the professionals give you the lap, must be made of visual effects and aesthetics are the best effect
