My family in the north of the countryside, when the original building, the guest 粻 chicken class Tuen Jiu halo Mo hall with a high 1 meter wide and 50 cm tiles close to the wall around the circle, his wife said it looked good, do not want Yes, but the original is attached to the wall with cement, not easy to get down. I would like to ask, can not use gypsum board or plywood stick to the top, how to get, thank you! More
Hurry to knock it! In the above coated with a layer of cement it!
Can not, if it is to stick to the tile on the board can also be a lot of tile shop is so on the board, because the back is the embryo body. In front of the glaze is no adsorption force
If not force, just a layer of decorative plate so that you can. But if you want to force, it is recommended or in the gypsum board or plywood above the lock a few screws, to the wall marked with a few holes, plastic Aberdeen plug, screws to a few, fixed more than anything. In addition, the direct treatment of the end of the class is not no action. My balcony is so dry. Brush the paint can not see. But when the spring and summer tide will see the traces of tiles under there. In fact, the demolition work is not big. Action carefully, garbage cleared in time on the line.
Can be sealed with gypsum board on top, first in the tile surface drilling into the cork, the interval with 305m 粻 chicken class lesson wine tao Mo Mo * 305mm, and then 3 * 25 flat head tapping screw to the gypsum board fixed Tile surface, if you worry about wet, you can switch to 6% calcium silicate board (recommended use, but also cheaper 12% gypsum board). The simplest can be a single tiles chisel, keep the paste of the cement layer, and then leveling the cement slurry, you can paint the dust
