Yes, it can better protect the mobile phone. Mobile phone film packaging tool: 1, wet cloth, fiber cloth, dedusting paster, mobile phone protective film, scratch cards and replacement film label. Mobile phone film sticking Step one. clean screen: 2, wipe the screen with a wet cloth which can clean the grease and fingerprints on the screen back and forth for several times as clean as possible. 3, dry the screen with fiber cloth. Dust or wool on the sreen can be removed in following steps. 4, clean stubborn?dirt like dust or wool with dedusting paster. Step two. stick film on screen: take mobile phone protective film out of the package, put the Screen Protector directly on the screen, observe the joint situation between the film and screen and the position of film to be stuck. 5, tear off the No.1 lable on the protective?film and stick the protective?film on screen. 6, align the hole and edge of mobile phone screen and try to touch the application layer. 7, stick the whole mobile phone protective film on the screen, tear off No. 2 lable. 8, scrape the bubble on the screen slowly with scraping card in need to discharge the air. 9, (if there are still bubble on the screen, stick the film up with dust sticker and then scrape the bubble with scraping card gently) 10, wipe screen with cloth, and the entire mobile phone film sticking process is finished. Or step one: Clean all dust. You can stick a gummed?paper larger than the screen on it, tear down, and the dust is removed. Second step: stick film, tear off the first layer and stick on screen, aided with a card. Third step: Tear off the second layer, OK.
It is worthwhile for common cellphone but not for high-end mobile phone. The film for high-end mobile phone will be better than that of common mobile phone. But when sticking film, you need to see the cellphone material. Some mobile phone does not need to stick film, not to say that the high-end mobile phone film.
