Home > categories > Consumer Electronics > LCD Monitors > LCD cannot display red
Question:

LCD cannot display red

Holiday today, the computer moved home, reinstall, and found that LCD can not show red,Change the red settings in the color temperature without a response... What's the matter?Don't tell me to fix it. I know. Is there anything you can do for yourself?

Answer:

Display color deficiency can be considered from the following aspects:First, the data line is not connected properly, for example, the plug is crooked. If this is the case, the data line can be re inserted and the fixed bolts on both sides of the connector can be screwed down;Second, the data lines, data lines inside wire fracture, or VGA plug pin is bent, resulting in poor contact, if this is the case, you can use the tools to bend the pins carefully straighten the pin, very soft, not broken;Third, the monitor is broken, this requires some special tools to detect, if not the first two cases, you need to take the monitor to repair the Department of repair.
Reinstall the systemIf not, then you'll have to get someone else's fix unless you can fix the monitor yourself
I have also encountered this situation. It must be that the video line of your monitor is not plugged in or damaged during the process of handling. Change the video line.
Should be the three primary colors, red signal is not connected, first look at the VGA connector socket has no breakage, loose connections or VGA connections to a problem in itself (you can try to replace the VGA cable or other host connection) in addition to the graphics VGA graphics card or the end of the problem.
What interface is it? I used to use VGA interface, if the interface is not plugged in, or crooked needle will appear a certain color can not display the problem (RGB color with a missing), do not know whether this is a problem of digital interface.You'd better check the interface first. Is there a problem?.

Share to: