Light steel keel ceiling steps? How to use wood?
Steps above almost with the board may be a special shape all with light steel keel can but can be very troublesome
You should also have a lantern with a lantern. The board is the lantern
Generally do not have to wood core board, and may be some special top, with wood core board to do with the annex.
Step 1: the line is the roof with ink cartridges hanging wire and ceiling height of the wall set.
??????? 2: roof bolts with hanging bolts
??????? 3: according to the needs of the height of the ceiling cut off the length of hanging wire hanging wire
??????? 4: nail keel corner
??????? 5: set up the main keel and hanging wire with fastening, need to hang the line to pursue the top of the flatness
??????? 6: laying the vice keel If it is mineral wool board keel size is fixed mostly 50X50 cm if it is gypsum board then it is wide 40X40 cm three meters long set joint keel (gypsum board size is 120X300 unit centimeters)
??????? 7: laying the process of laying the decorative lights and the main light of the fastening plate (decoration workers love to board the board when the light on a very good amount of tight screws)
Step above has been said, the board is to facilitate the construction, the edge of the lamp pool has a certain height, with light steel can not do, directly boarding the wooden side is not easy to straighten, so choose to use wood! The surface need to do fire treatment!
