Loader water tank badly, what is the matter?
There are three reasons for the estimation. The first is the shortage of water. The reason for the lack of water may be that the kettle or the water tank is not covered properly or the cover is not tight, which results in the evaporation of water in the form of steam. The water shortage is formed after a long time, and another possibility is the water shortage caused by the seepage of water channel. When the engine internal water shortage to a certain extent, will affect the heat, causing the engine internal heat can not be distributed in time, resulting in high temperature and the formation of a large number of steam, the steam water ejected coerced.
Is parking or normal work? If it is recommended when parking, stop working after watching the water temperature gauge if relatively high, close to 100 degrees, low speed operation engine temperature drop down in the closing key to stop the engine, and pay attention to the water tank cover is correct or cover tight pressure valve failure. If the normal operation of water spray, we should consider the heat system problems.
The second reason may be dirty inside engine channels (such as scale, rust and other things to plug or precipitate in the internal channel), causing water circulation, thus forming a high temperature water jet phenomenon. There is also a situation should pay attention to, when the tank itself is blocked by dirt, there may be poor heat.The third reason may be the poor water pump performance. Pump work is bad, both the pump itself may be bad, but also may be too loose pump pulley slip.
