Loaders often have hidden safety problems
6, in the downhill, prohibited loader coasting in neutral.7, loader in operation, under the arm of the arm, no one stand or pass.8 when the loading boom is raised, the safety pin must be fitted or other measures taken to prevent the falling of the arm.9, loader in the work should pay attention to any time to remove the tire (or track) between the stone slag.10, night work, fashion machines and workplaces should have good lighting.Four, the loader following the work should pay attention to the following safety matters:1. Load the loader from the work site and park the machine in a flat safety zone.2, Matsushita bucket, and wood pad. Remove dirt and gravel from the bucket.3 、 maintain and maintain the machines according to routine maintenance items.
2 when the loader is working with the dump truck, the dump truck should not pass under the bucket when loading.3, loaders in full bucket travel, bucket should not be raised too high, generally about 0.5 meters from the ground is appropriate.4. The loader should avoid improper high speed and sharp turn when driving.5, when the loader encountered resistance increases, tires (or tracks) skid and engine speed down and other phenomena, should be stopped shovel installed, shall not be forced to operate.
I. The general safety technical requirements of loader drivers shall be carried out in accordance with the general technical requirements of general earthwork machinery.Two. Before the loader work, the preparatory work shall be carried out in accordance with the relevant regulations of the excavator.Three, loaders in the work should pay attention to the following safety matters:1, brakes, speakers, steering machines should be complete, sensitive, in driving to comply with: "traffic rules."". If you need regular driving on the highway, the driver must have the "motor vehicle driving license".
