Home > categories > Furniture & Décor > Bed & Bed Frame > Method for making invisible bed
Question:

Method for making invisible bed

Method for making invisible bed

Answer:

Fixed the headboard and mattress fastener.In general, the production of the invisible bed is divided into these steps, like DIY friends, you can about their own small partners together to make a hidden bed oh.
Process for making invisible bedStep 1: fix the cabinet with expansion screws to the wall before installation.The second step: take out the foot of the bed, put the shorter iron bar into the plastic tank outside, take out the screw at the end of the bed and fix the end of the bed.The third step: the long self tapping screws through the frame fixed on the panel, the fixed time must pay attention to the bed panel and iron three edge alignment, measurement of appropriate distance is fixed holes, screw, fixed panel.The fourth step: take out the bed frame fixed board, in the installation before, we want to distinguish between the left and right sides of the board, installation should pay attention to balance, the two boards must be at the same height.The fifth step: the fixed screws and short self tapping screws are fixed to the bedstead, and the large screw on the bedstead is screwed to the fixed plate. Tighten the screws at the end of the bed.The sixth step: take out the pressure bar, and use the pressure bar to fix the screw cap, so that the good screw can become more compact. Take out the head shield screw lever, screw the screw cap down, put it behind the baffle plate, screw through the frame and baffle, hold the screw cap behind, and unscrew the screw lever. The rest of the modeled on screw.The seventh step: the bedside board hinge fixed the appropriate seat, and the bedside board on the mattress baffle.
Material for making invisible bedsThen draw a sketch, then is to buy a tool to use: expansion screws two sets, the foot of the bed, the foot of the bed two screws two, long self tapping screws twenty, two, short board fixed bed, the foot of the bed twenty self tapping screws screw two, pressure rod 90s120s two of the other four root the screw rod is turned, the bed baffle three rollover four root, the bedstead and the bed bar through the baffle plate, vertical plate hinge is over three, four rollover bedside panel connecting rod two, two sets of bed, bed buckle two, baffle the appropriate size of the bed board and the bed panel, screwdriver, drill. Some of these tools are more or less likely to be used, so it is recommended to buy one or two spare parts per item.
It's not easy to make an invisible bed, we have to do a good job - measurement. We have to measure the size of the furniture and space that determines the size of the hidden bed.

Share to: