Home > categories > Transportation > Electric Bicycle Motor > Method for operating motor of electric vehicle
Question:

Method for operating motor of electric vehicle

Method for operating motor of electric vehicle

Answer:

In the electric bicycle industry, the motor generally refers to the motor assembly, including the motor, heart, deceleration mechanism. Below we are talking about electric bicycles are motor assembly.I. dismantling of the motorBefore removing the motor, the motor and the controller's lead should be pulled out first, and the corresponding relationship between the lead color of the motor and the lead color of the controller must be recorded. Before opening the cover of the motor, the operating area shall be cleaned so as to prevent the sundries from being sucked into the magnetic steel in the motor. Mark the relative position of the end cap and the wheel hub. Attention: be sure to loosen the screws in diagonal order so as to avoid the deformation of the motor housing. The radial clearance between the rotor and stator is called air gap (air gap), and the air gap of the general motor is between 0.25-0.8mm. When the motor is removed and the motor is removed, it must be assembled according to the original cover mark so that the phenomenon of sweeping after the two assembly can be prevented.

Share to: