Home > categories > Minerals & Metallurgy > Fiberglass Mesh > Who knows the different functions of the steel wire mesh?
Question:

Who knows the different functions of the steel wire mesh?

nan

Answer:

The steel mesh is metal; The mesh is made from fiber; They are made from different raw material. They are both arranged in two different wall plastering seams and take the effect of anti-cracking. Generally speaking, in the graphic computation, you can look over the work amount in the report forms. And the steel wire gauze and Mesh are both having their own uses. Mesh is a fiber cloth paved in when pastering. It can prevent the wall from cracking after pastering.
The wall takes use of the filling block. It takes use of the whitewashing and then be filled up with steel mesh. It is for the foundation treatment of the wall, preventing the future expansion and contraction, to make the plastering layer not hollow or crack. To use the Mesh to make a full pavement. To reach the flatness of the wall, reinforce the binding degree of the surface, and consolidate the base. The steel mesh is generally used in the joint of the after laying wall and the original wall, and it can also used for improving the reinforcement of the wall space. The Mesh is suitable for the use of many parts.
The alkali-resistant fiberglass mesh is very soft and it can disperse the stress of the deformation( the deformation out of the temperature) so that it can not share the tensile force of the plaster adhesive layer. When the basic weight of the fiberglass mesh increases, the greater of the tensile strength of the brick, the less obvious of the amplification. When the mesh size of the fiberglass increases, the binding strength of the brick is presenting the appearance of the first increase and the later decrease. Alkali-resistant fiberglass mesh reinforced the role of the grass-roots strength of small, can not effectively disperse decorative tile floor, loading or load a direct effect on the grassroots level in lower strength insulation layer. The alkali-resistant grid layout is to enhance the tensile strength in parallel direction. It has no any improvement of the strength in the vertical direction. The damaged parts after drawing is mainly concentrated on the surface of the glass?fiber Mesh. Either the single-layer glass?fiber Mesh or the double-layer Mesh is choosed, the veneer of the facing brick is not recommended to use.

Share to: