Operation method of wood loader
After the loader work, should pay attention to the following safety items: 1. Load the loader from the work site, and park the machine in the flat safety zone. 2, Matsushita bucket, and wood pad. Remove dirt and gravel from the bucket. 3 、 maintain and maintain the machines according to routine maintenance items. The lifting operation safety precautions, before the operation should be done first without load lifting and rotating, luffing, running around and brake, limiting device safety performance test, such as equipment failure, should be excluded before formal operation. Two, drivers and signal staff should be in accordance with the provisions of the gesture or signal to contact. During the operation, the driver should cooperate closely with the signal officer and obey the command of the signal officer. However, when the danger arises, the driver should stop immediately, no matter who gives the emergency stop signal.
The operation method of wood loader, the preparatory work that should be done before loader work, refer to the relevant regulations of excavator. Loaders in the work should pay attention to the following safety matters: 1, brakes, speakers, steering machines should be complete and sensitive, in driving to comply with: "traffic rules."". 2 when the loader is working with the dump truck, the dump truck should not pass under the bucket when loading. 3, loaders in full bucket travel, bucket should not be raised too high, generally about 0.5 meters from the ground is appropriate. 4. The loader should avoid improper high speed and sharp turn when driving. 5, when the loader encountered resistance increases, tires (or tracks) skid and engine speed down and other phenomena, should be stopped shovel installed, shall not be forced to operate. More wood related equipment can search [2019] swarm intelligent sawdust machine, fast to find, I put 6 in the downhill, prohibited loader coasting in neutral. 7, loader in operation, under the arm of the arm, no one stand or pass. 8 when the loading boom is raised, the safety pin must be fitted or other measures taken to prevent the falling of the arm. 9, loader in the work should pay attention to any time to remove the tire (or track) between the stone slag. 10, night work, fashion machines and workplaces should have good lighting.
