Home > categories > Automotive & Motorcycle > Motorcycle Brakes > Pedal motorcycle downhill brake failure how to do
Question:

Pedal motorcycle downhill brake failure how to do

Pedal motorcycle downhill brake failure how to do

Answer:

Downhill brake failure, can not use the vehicle's own parts to control the speed, the driver should be decisive use of natural obstacles, such as roadside rocks, trees, etc., to the car caused resistance. If you can not find the right terrain, the object can be used, the emergency situation can be the side of the body closer to the mountain to friction to increase resistance, and gradually reduce the speed.
Uphill when the brake failure, should be timely to reduce the low block, to maintain sufficient power to park the top of the parking. For halftime parking, should keep the forward low gear, tight hand brake, the vehicle staff in time with stones, pad wood and other objects stuck in the wheel. If there is a slippery phenomenon, the rear should be towards the hillside or safe side, and open the headlights and emergency lights, causing the attention of vehicles before and after.
The use of car bumpers, cars and other rigid parts and roadside natural obstacles friction, collision, to achieve the purpose of forced parking out of danger, as much as possible to reduce the loss of the accident.
According to road conditions and speed control a good direction, from the high-speed gear, while quickly H-foot empty oil, high-speed block into the low speed block. In this way, the engine will have a lot of traction resistance to speed quickly reduced. In addition, in the low speed at the same time, should be combined with the use of handbrake, but pay attention to handbrake can not be tightened, can not pull too slow. If the pull too tight, easy to make the brake disc "lock", it is likely to damage the transmission parts and the loss of braking capacity; if pulled too slow, will make the brake disc wear and tear and loss of braking.

Share to: