Santana 3000 car washing a few days before the release there, the car can be normal start, that is, the wheels will not move, can not move forward and backward, push also push not move, how do ah Car dashboard display normal, how do ah
You are not always holding the hand brake Yeah, put a few days hand brake line into the water to live, and Dora a few knock on the rear wheel, push the car about what the activities.
Usually in the rain or car wash, the vehicle parked more than a certain time (usually about a day), after the brake drum inside the surface of the brake pads and rust easily lead to rust. There are two solutions, one is forced to start, fierce throttle, as long as the rear wheel of a move, all right. Second, the tire removed, according to the brake drum hammer and the like knock on the two, so that the brake drum and brake pads on the surface of the release on the line. Do not need to check what things, the normal phenomenon, as long as the response to appropriate measures can be avoided. First in the car wash or rain brake drum into the water, do not immediately stop, take a period of time more step on the brakes to keep the water inside the evaporator or in the parking do not pull the handbrake, manual file hanging 1 file, automatic file hanging P file The car is absolutely slippery. So that the brake drum and brake pads do not contact will not cause rust dead.
Is the rear wheel brake stuck
Usually in the rain or car wash, the vehicle parked more than a certain time (usually about a day), after the brake drum inside the surface of the brake pads and rust easily lead to rust. Forced start, fierce throttle, as long as the rear wheel of a move, all right.
