Small satellite TV receiver suddenly not received signal strength for Taiwan, 60 unchanged, the signal quality is zero
You can ask someone's home is not like this if it is not you in their own home to find a best original signal Taiwan and then adjust the pot or if the signal receiver is not bad of course you'd better find a home ahead of others to get their own home receiver try to know why
If you do not move the pot is a satellite thing, if the pan, re - down signal
The pot should be the first check range at the receiver and tuner interface feeder is not good then contact at the receiver for information under the condition of pot slowly increase the general elevation azimuth changes less mostly range changed a bit biased to Taiwan will have no point to move left on don't move so hard to find the right one that carefully
The pot missed the satellite. The present satellite TV receiver has been stored in the aircraft prior to leaving the factory, and it is not necessary to search the station when it is installed. If the installation: connect the line to the TV pot to adjust to the AV mode, press the menu button to open the receiver (or directly by adjusting the star key or F3) and then transferred to the system settings and press the confirm button to enter the password again '0000' or '9999' to press the enter key, see sub menu "installed and in signal detection. The lower right corner of the screen is two line display signal strength and signal quality for two color, and then around the adjustable elevation and side pot placed southwest slowly up and down, the numerical signal quality to maximum fixed pot and see TV tuner, can press the eject button (because the receiving machine factory orders have existing machine pre season inside, not recovery) according to factory settings and automatic search, because the satellite is not aligned in the pot when absolutely not search programs, but the original pre program parameters will also be removed.
