Home > categories > Mechanical Parts & Fabrication Services > Pipe Fittings > The pipe joint model is 1/2 "-14 teeth / inch"
Question:

The pipe joint model is 1/2 "-14 teeth / inch"

The pipe joint model is 1/2 "-14 teeth / inch". What does this mean?

Answer:

British thread is the size of the thread in English, marked by the shape of cylindrical, cone two, according to the tooth type angle of 55 degrees, 60 degrees, two kinds
The pipe joint model is 1/2, -14 teeth / inch: This is the English 55 degree taper pipe thread, the specific parameters are: big diameter 20.955mm, pitch 1.814mm, other parameters can be listed under the table:
. The 1/4, 1/2, and 1/8 marks in the thread refer to the diameter of the thread dimension, in inches. An inch equals 8, and a 1/4 inch is 2, so an analogy. The pitch of the English thread is indicated by the number of teeth per inch, such as 11 teeth per inch, and the pitch is =25.4/11=2.309mm.

Share to: