Home > categories > Consumer Electronics > Tablet PC > The tablet is not connected to the computer
Question:

The tablet is not connected to the computer

After connecting to the computer desktop, and although there is a safety angle to remove software logo, but I open my computer, which although there are two hard but when opened, it said, please insert the disk drive H: This is how ah tablet in USB debugging is useless

Answer:

Motherboard driver is no good, two solutions, 1 upgrade, update drive, 2 refresh system. If memory fails, replace it. Different machine method is slightly different, look at yourself to do it.
1, there should be two or more of the letter you said, a built-in storage disk plate, one or more is on the plate storage expansion slot of the letter.A, if you are the disk with the emergence of the problem, or with computer connection is not good, or is the connector; plate itself, this panel itself should also have the problem of operation.B, if you are an expansion slot letter, there is no memory card, "insert disk drive" that is correct; there are cards, most cards have problems or bad contact and card slot.2, the computer device manager access controller all deleted, reinstall the driver, change the root data line, and then change the USB port, connect the computer to try.3, the flat itself system, as well as the operation of what, there is a problem?
Flat panel structure, system, function, and mobile phone is about the same.Connection method, pen, cell phone is the same. Try changing connector and interface.One, in the computer and mobile phone installation, 360 mobile assistant and so on connection auxiliary program. This connection is convenient, fast and stable.Two, open the flat USB debugging mode. The method is the same as the cell phone.1, settings - system settings - about mobile phones2, find the phone version number, continuous quick click more than 4 times, there will be hints, has been torn debugging mode. Quit on the phone, in the settings menu, you can see the settings have already amused developers options menu.3, select the developer option, you can see the USB debug menu, check it.Three, flat connect computer. It can be automatically identified.

Share to: