Tile selection, paving process
The base should be clean, irregularities to chisel and repair, base should be clean, not a mortar, especially lime mortar, oil, and water wet ground.When laying stone or ceramic tile, standard blocks shall be placed. Standard blocks shall be placed at the intersection of cross lines and diagonally installed.Paving operation to each line in line, the stone must be soaking wet, dry wipe back.
Clean up the grass ground, cement mortar, fixed elevation, elastic line, sheet materials choosing, soaking wet, standard for the installation of block, paving cement mortar, paving stone, pouring and cleaning, maintenance and commissioning.
The stone used for indoor ground is generally polished board, the thickness of the plate is about 20 millimeters, and now there are thin plates, the thickness is about 10 millimeters, suitable for family decoration. Each block is 300 mm x 300 mm, ~500 mm * 500 mm. Plates and 1:2 cement mortar can be used with 107 adhesive plaster.
