Use of bench vice (simple point)
When working with the workpiece, only the power of the hand is allowed to handle the handle, not the handle with the hammer, lest the screw, nut, or the clamp be damaged.
The vice clamp on the table must be firm, two clamped screws must be tightened.
When the vice is installed on the tongs, the sweet mouth of the clamps must be placed outside the edge of the tongs.
Bench vice is a common fixture used to hold the workpiece. The purpose of the bench vice is on the workbench, which is used for holding the machining workpiece, which is a necessary tool for the fitter workshop. The rotary clamp can rotate to make the workpiece rotate to the appropriate position. The specifications of the tongs of the table are indicated by the width of the tongs, the usual specifications are 100mm, 125mm, 150mm etc. [editor this paragraph] use vise considerations: (1) the clamping workpiece to slack when appropriate, can only use hand tight grip, shall not use other tools and stronger. (2) when working hard, try to keep the force toward the fixed pliers. (3) do not knock on the active clamp and smooth surface. (4) the surface should be cleaned and lubricated regularly to prevent rust.
Keep the screw, nut and other activities on the surface often and keep clean and be lubricated. In addition, the tools such as iron scissors, medium cloth scissors, wooden hammer and rubber hammer are also commonly used in repairs. In fact, it is mainly used for fixed objects, which facilitate further processing
