Vacuum packaging machine fault handling methods which
Stop 8. Seal uneven, not tight or not sealed Steel box deformation adjustment Steel box 9. While heating, while not heating 10. Pump does not take the vacuum 11. Cover does not work, etc.
2, the vacuum pump coupling wear or rupture replacement; exhaust filter blockage or installation position is not correct, clean or replace the exhaust filter and installed correctly; there is a leak to check whether the solenoid valve leaks and remove.
Power, check the solenoid valve, pipe joints, vacuum pump suction valve and the studio peripheral gasket with or without leakage.
1, pump oil pollution, too little or too thin cleaning vacuum pump, replace the new vacuum pump oil; pumping time is too short to extend the pumping time; suction filter plug cleaning or replace the exhaust filter; leak,
In the process of using the vacuum packaging machine will encounter the following several common problems: 1. Vacuum low 2. Noise 3. Vacuum pump injection 4. Vacuum pump oil leakage 5. Vacuum pump smoke 6. Do not heat 7. Heating is not
