Wash basin basin inside the two pipes how to split

Answer:

Wash basin faucet in the two tubes is hot and cold water pipes, a cold and a hot, are generally stainless steel metal fiber network management, even the root pipe connected to the top of the screw above the other head to connect the wall set aside hot and cold water angle valve, Replace the method is, first two pipe connecting angle valve unscrewed, and then fixed under the faucet in the washing machine on the screw off, and then the faucet with two pipes from the top of the hole out of the hole (you can also make up Will take off the following operation will be completed in the cabinet, but the effect is not as easy to remove the faucet operation), the next is to take the tube, one by one, holding the faucet, and then counterclockwise twist one of the water pipes, Grasp the strength, then remove the next twist, so that is completed, the installation of the contrary

Replace the method is, first two pipe connecting angle valve unscrewed, and then fixed under the faucet in the washing machine on the screw off, and then the faucet with two pipes from the top of the hole out of the hole (you can also make up Will take off the following operation will be completed in the cabinet, but the effect is not as easy to remove the faucet operation), the next is to take the tube, one by one, holding the faucet, and then counterclockwise twist one of the water pipes, Grasp the strength, then remove the next twist, so that is completed, the installation of the contrary

First remove the two pipes, and then in the basin below the fixed faucet can be removed on the red cap.