Home > categories > Construction & Real Estate > Basin Faucets > Wash basin faucet how to change the hose
Question:

Wash basin faucet how to change the hose

Wash basin faucet how to change the hose

Answer:

The faucet first appeared in the 16th century, cast with bronze, the main role is to control the size of the water outlet switch and water flow. Early faucet is spiral lift type, to the market most of the ceramic spool faucet, spiral lift type has basically been eliminated.
The faucet is the popular title of the water valve, used to control the size of the water switch, there is water saving effect. The replacement of the faucet is very fast, from the development of old cast iron to the electroplating knob, and the development of stainless steel single temperature single control faucet, stainless steel dual temperature dual control faucet, kitchen semi-automatic faucet. Now, more and more consumers to buy taps, will be from the material, function, modeling and other aspects to consider
6, the threaded tube screwed into the lower side of the container, the top of the container on the silicone pad at this time can be placed on the lower side of the faucet. 7, nuts fixed faucet, the nut can be tightened, the installation is complete.
First, remove the whole copper fixed base. Second, the nut from the threaded tube counterclockwise rotation down. Three, hose worn yellow wrench, nut, thread tube, silicone pad. Four, between the hose through the need to install the vessel (sink, basin, etc.). Note: the silicone pad in the vessel on both sides of the installation of a piece, and finally tighten the fixation can be more stable. 5, the hose of the small head, hand screw into the faucet, screwed to the screw can not move, without the help of other tools to die.

Share to: