Home > categories > Rubber & Plastics > Rubber Hoses & Fittings > Water heater hose 4 points and 6 points difference
Question:

Water heater hose 4 points and 6 points difference

Water heater hose 4 points and 6 points difference

Answer:

1 inches =25.4mm, 4 points hose is DN15 pipe, that is, the inner diameter is 15 millimeters, 6 points hose is the diameter of 20 mm tube, 5 to 4 hose, you should say that the variable hose hose is divided into: stainless steel. Divide 1 inches into 8 parts, eight in 49, four in charge, and 6/8 in six.
The 1/ angle valve itself is provided with a switch and the long end is mounted to the wall pipe. If the toilet or faucet to repair, turn the corner valve closed, the hose will be out of water; 8 (7 points), the domestic pipeline and hose connecting the city 4 points thread; 4 (6 points) domestic are 6 points interface; imports of 4 points.
4, in charge of and 6 in charge, from the caliber is obvious to see out, 6 in charge of greater than 4 in charge. Inside diameter 4 inches, have 13.2 millimeter about, 6 inches are 19.8 millimeter, 6 inches of pipe than 4 inches big. 6 points in diameter 1.6cm, 4 points in diameter 1.2cm, see thickness can be distinguished, 4 branch pipe diameter is 20mm, and 6 points water pipe diameter is 25mm, general heating with 6 points, slightly thick. The tap water is 4 inches fine.
4, in charge of 1/2 inches of pipe, 6 in charge of 3/4 inches of pipe, different specifications of some differences.The so-called 5 turn 4, should be different diameter, that is, pipe and pipe joints, parts of different specifications.A bellows is a pipe, not flat, corrugated.

Share to: