what are LED ceiling lamp notes
The installation of the product must be certified professional electrician, do not suggest private disassembly and assembly
The product with flammable materials to ensure at least 0.2m distance, to ensure that the installed zenith 2 cm high clearance, not all installed in the lamp zenith inside, or heat wall, should pay attention to low voltage and high voltage electrical connection separately.
The dirt on the lamp holder is clean. You can remove the dust on the surface first, then wipe it with some cotton cloth. Don't leave the moisture on the lamp holder. When scrubbing the ceiling lamps, should use light colored cotton or cotton hand is in your hand, gently wipe the lamp, do not arbitrarily moving parts inside the lamp. After cleaning, the lamp should be installed as it is. Do not leak or install parts.
Daily cleaning method for dimming LED ceiling lamps as the ceiling lamps hanging in height, lampshade, lamp is easy to break, so, remove the cap, as far as possible with two people; before the demolition, turn off the power first, do not use wet cloth to scrub the holder, prevent leakage. Ceiling lamps lampshade clean ceiling lamps according to the different materials also have shade, different cleaning methods: cloth shade, first with a small vacuum cleaner dust off the surface, then pour some detergent scrub; if the inside is a paper lampshade material, direct use of detergents should be avoided to prevent breakage, wipe with dry cloth it can be cleaned with a soft cloth dipped in toothpaste; frosted glass lampshade, convex and concave dirt with soft cloth wrapped with a toothpick.
Dimming LED ceiling lamp maintenance precautions installation roof case if it is made of stone and brick roof, using embedded bolts, expansion bolts, or the use of nylon plastic plug, plug is fixed, not with wedge. Usually not the lamp hanging too much decoration, or exceeding the carrying capacity will fall down to keep the indoor temperature for wounding especially crystal lamps, often set a specific environmental temperature, the temperature is too high or too low will affect its life, so to keep the temperature suitable for regular inspection lamps if the lamp feet appear bad contact or starter loose, should be re installed and adjusted timely avoid hard hit lamps or easy to scratch the surface of the lamp, the lamp body will make serious fragmentation. Keep the balance if you want to move the lights
