What are the definitions and differences between left and right offset knives?
Offset cutter: it has a main deflection angle of 90 degrees. It is used to turn the end face and the step of the workpiece. Sometimes it is used for the outer circle of the car, especially for turning the outer circle of the slender workpiece. It can avoid bending the workpiece. Partial knife is divided into two kinds of left leaning knife and right offset knife. The most commonly used is the right offset knife, and its blade is left
The left side of the knife is flat, the cutting edge is on the left, and the right edge is the cutting edge, and the right place is selected according to the actual location of the tool and the actual processing of the workpiece.
When the tool hits you, the blade is on the left, the left, the blade on the right, or the right. When machining, the direction is different.
Definition: left, when the knife is clamped, the cutting edge is left, right, and the knife is on the rightDifference: when the workpiece is machined by the left offset cutter, it moves from the tailstock to the main shaft, and the opposite to the rightPersonal opinion, adopt landlord
