What are the methods of use of the dehumidifier?
The air treatment process of solid moisture absorbent is the process of constant humidity and humidity rising. The dehumidifying method of solid adsorbent is divided into two kinds: static state and dynamic state. Static moisture absorption is to make moist air contact with hygroscopic agent in a natural flow state.
The main characteristics of liquid desiccant: air humidity reduction range, at lower temperatures can also achieve good results. However, the concentration of hygroscopic agent should be adjusted in time, and the corrosion inhibitor shall be added with corrosion inhibitor to prevent corrosion of the equipment
The cooling water and drying of the wet air can be realized by using a water spraying meter combined with a water spraying chamber and a watch and a cooler. In addition, cooling and dehumidifying of air can be realized by using a special cooling and dehumidifying equipment - a freeze dehumidifier
Ventilation and humidity reduction: it can send air into the room which is lower than the indoor air and the humidity is high, so that the humidity can be eliminated. The purpose of ventilation and humidity reduction can be achieved. Its disadvantage is that it can not adjust the indoor temperature
Heating and dehumidification: heating the air and increasing its temperature results in a decrease in the relative humidity of the humid air. Its drawback is that it does not reduce the moisture content of the air.
