What are the reasons for the wheel deviation?
Second, the steering system is also good or bad will affect the straight line of the car. The connector due to wear gap is too large or bearing, the main pin, bushing wear caused by loose, will cause the car in the swing in the ride, can not maintain normal movement If the steering knuckle, knuckle bending deformation, the general will cause the car one - way deviation.The most serious is the cross - bar after the ball seriously wear loose, will lead to steering failure, when the car will be completely out of control. X0d hazards: deviation is caused by eating, tires scrapped, while in the lead to puncture, vehicle out of control and other dangerous situations.According to the survey, for the ordinary family car, in the 150km / h after the birth of the puncture The probability is less than 20%; deviation is not the kind of flew can make the car anchor problems, but long-term driving deviation of the vehicle or there are many hidden dangers, if the deviation should be checked and maintenance
Impression as long as the car deviation, most of the drivers will think it is to do the four wheel positioning, it is not true, resulting in a lot of reasons for deviation, tire pressure will be partial deviation, tread pattern wear degree is not the same deviation , Hanging system design problems or suspension of injury, deformation, displacement, etc. will occur deviation, in short, lead to a lot of reasons for deviation, but the four-wheel positioning is like a headache by the same way the same reason, all the deviation In fact, the problem will be mainly concentrated in the tires and suspension. X0d tires: you can first check the factory given the rated tire pressure, the pressure is not the same as the four- Most of the domestic cars are set between 2.0 and 2.5 bar, the pressure value of the front and rear wheels are also different, if the tire pressure will inevitably lead to deviation; in order to better use the tire, every twenty thousand kilometers should be replaced tire Of the position, because the drive wheel wear degree will always be larger than the other wheels, different friction will directly lead to deviation. X0d
