What are the responsibilities of a crane driver before work
In operation, there is a sudden power failure which must be cut off by the switch lever power switch, the lifting piece is not put down or the lock is not decoupled from the work scene. (11) when the crane is down due to a sudden failure, emergency measures must be taken to land no one. (12). At run time, the two crane cart wheel should not be less than 500mm. (13) during the hoisting operation, it is not allowed to operate three institutions at the same time. (14). The crane driver must do "ten unhanged".
The night homework should be well illuminated. (7). When the hook does not run, it should rise to above one person. (8). When repairing, the crane should be placed in a safe location, cut off the power supply, and put up the "ECPL" life listing lock. The ground shall have a fence and a "no passing" sign. Do not repair and adjust during crane operation. (9).heavy tonnage items should be hoisted slightly away from the ground before lifting, making sure that the suspension is stable, the brake is good, and then it is elevated and slowly running. Run (10).
The responsibility of the driver in the operation (1) you must follow the conductor, but the emergency stop signal for anyone should be stopped immediately. (2). When approaching the volume limit, the speed is slow when the big car approaches the terminal or meets the neighbor. Do not use reverse car instead of brake, don't use the limiter as the power to stop the power, don't use the emergency switch instead of the ordinary switch.
The responsibility of the driver in the operation (1) you must follow the conductor, but the emergency stop signal for anyone should be stopped immediately. (2). When approaching the volume limit, the speed is slow when the big car approaches the terminal or meets the neighbor. Do not use reverse car instead of brake, don't use the limiter as the power to stop the power, don't use the emergency switch instead of the ordinary switch.
To follow the succession system strictly, to make the succession work, to make a record of the equipment status to the intersections or to the intersections. 2. Should be check carefully before driving mechanical equipment, electrical parts and insurance protection devices are in good condition and reliable, after confirm everything is ok, can open the power switch, the empty test run for each agency to a few times, carefully check the safety interlock switch and limit switch action sensitive reliability, if the controller, brake, stop, bell, emergency switch failure and other major attachment, it is strictly prohibited to lifting, and record in the tally sheet of the equipment. The responsibility of the driver in the operation
