What are the types of plates for office furniture?
Fireproof board
Fire board is made of siliceous material or calcium material as the main raw material, with a certain percentage of fiber materials, lightweight aggregate, adhesive and chemical additives mixed by the autoclave technology made of decorative plates. Is now more and more use of a new type of material, its use is not just because of fire factors. The construction of the fire board for the glue glue requirements are relatively high, better quality fire board price than the decorative panel also expensive. The thickness of the fire board is generally 0.8mm, 1mm and 1.2mm.
Melamine board
Melamine board, full name is melamine impregnated film paper facing wood-based panel, is a wall decoration materials. The manufacturing process is to put the paper with different colors or textures into the melamine resin adhesive soak, and then dry to a certain degree of curing, will be paved in the particleboard, medium density fiberboard or hard fiber board surface, made by hot Decorative plates.
Density board
? MDF, also known as fiberboard. It is made of wood fiber or other plant fiber as raw material, urea-formaldehyde resin or other suitable adhesive made of artificial plate, according to their density, divided into high density board, MDF, low density board. MDF due to soft impact resistance, but also easy to re-processing. In foreign countries, MDF is a good material for making furniture, but because of the national standards on the height of the board than the international standard several times lower, so the use of MDF quality in China has yet to be improved.
Particleboard
Particleboard is made of wood scrap as the main raw material, and then infiltration of glue, additives made of thin plate. Pressing the press method can be divided into two categories: extruded particleboard, flat particleboard. The main advantage of this type of sheet is the price is extremely cheap. Its shortcomings are also very obvious: very poor intensity. Generally not suitable for the production of large or mechanical requirements of the furniture.
Blockboard
Blockboard, commonly known as big core board. Daxing board is made of two pieces of veneer stamping together. Big core board price is cheaper than the core board, the vertical (to the core material to distinguish) bending strength is poor, but the lateral bending strength is higher.
Office furniture, the classification of the board are generally similar, the specific are divided into five points, but in order to understand its essence or need to learn slowly.
1, solid wood board
As the name suggests, solid wood is made of complete wood made of wood. These plates are rugged, natural lines, is the best choice in the decoration. However, due to the high cost of such plates, and the construction process requires high, but not much use in the decoration. Solid wood panels are generally classified according to the physical name of the plate, there is no uniform standard specifications. At present, in addition to the floor and doors will use solid wood, the general use of our plates are manually processed out of the wood-based panels.
2, plywood
?Plywood, also known as plywood, line known as fine core board. Made of three or more layers of one millimeter thick veneer or sheet adhesive. Is the most commonly used furniture handmade furniture. Plywood is generally divided into 3 PCT board, 5 PCT board, 9 PCT board, 12 PCT board, 15 PCT board and 18 PCT board six specifications (1 PCT is 1mm).
3, decorative panel decorative panels, commonly known as panel.
Is the solid wood board precision cut into a thickness of about 0.2mm meager veneer to the splint as the substrate, made by the adhesive process made with a single decorative effect of the decorative plate. It is a special way of plywood existence, with a thickness of 3%.
