What do you do when you go to the motor to vibrate?
So, you want to have a single check; Check to see if your drive matches the machine. Whether the power cord is plugged into the right/good/can. Try to change other frequencies; Voltage retry; Replacing other machine tests;
Everyone said: stepper motor shaking usually because of electricity in the right order (of course does not exclude the mechanical failure), cause the electricity order right outside the following reasons: Drive selection errors; The power cord has a loose/contact problem; The frequency is not right; The voltage is too high or too low; Mechanical failure;
Normally, when the motor is energized, it will suddenly shake, which is normal. Because electrical motors will look for an initial phase point in a second. There will be no jitter in the run, and there are several possibilities when there is a situation: The breakdown of the drive is not good, and if it is subdivided, you can either reduce the breakdown or increase the pulse frequency. The driver current is not sufficient to see if the driver current is in the working current area The motor is too heavy. Provide enough voltage. Usually if the equipment has no problem, it can be solved by the above examination.
