What do you need to pay attention to the installation of composite flooring?
The ground must be flat, do not have any debris
First ground flat, dry ground, Gloria floor is good, home improvement security options
1, clean the ground before installation. Especially where there is a "tumor" to eradicate. 2, will be wired, telephone lines, network cable layout. 3, if the wall of the heating tube too thick too deep, it is best to fill with dry sand. Do not use cement to seal! 4, if there is water pipes, heating pipe transformation must notify the installation of the master, so as to avoid accidents! 5, sprinkle the floor medicine, corner and door to sprinkle more. 6, asked the installation of the master will be under the door saw the saw, so that the floor inserted in the door under the set, so install more solid. 7, paved waterproof mats, if it is geothermal ground, must be used for geothermal mats. 8, before the installation of the best box to open, check the floor surface there is no corner (this situation is very small, but also to prevent). 9, be sure to keep the floor and wall 8mm telescopic space. 10, be sure to let each room into a plate. (At the door off, leaving the telescopic space) if it is a large area, each break 8-10 meters off once. 11, the installation of kicking angle, the best use of yin and yang angle, because the use of the yin and yang angle, kick the corner joints will be strong. 12, floor and kitchen floor tiles connection is best equipped with copper or stainless steel bar, do not use ordinary plastic strips. 13, before the completion of the installation must be fully accepted once again. 14, gold home building materials one-stop supermarkets all kinds of decoration materials are welcome to buy Oh!
