what does a electric blanket converts electrical energy to?
Cut the cracked piece with a hacksaw. Bring it to the hardware store and buy one the same size and you will also need to buy 2 coupling sleeves and PVC glue.
Carl is the man with the right answer the band aid does work after you have cut the piece of pipe with an overlap of at least 40mm paint the entire piece with plumbers glue, the blue stuff place it over the damaged area jobs done
there is a kit you can purchase for short cracks available at major home imp. centers. otherwise you'll have to cut the damaged area with a saw or special shears designed for cutting PVC and replace the broken area. you'll need to purchase PVC cement and a coupler for joining the old with the new. its not too hard. and short runs of PVC are dirt cheap. make sure to get the right diameter. it usually says the diameter on the pipe. it's usually 1/2 inch or 3/4 inch.
I have a dock for speakers that keeps it charged while in use. I also have an ac adapter so if I need to plug it into the wall I can. Other than that, I do not think you need much. Maybe a radio adaptor if you wish
Cut out the damaged section of pipe, as smoothly as you can. Take that to a hardware store and they will help you get the right size and length of pipe to replace it with, they will also have something to reconnect it with. Note when you cut away the damaged section, try to leave yourself as much good pipe as possible and at least a couple of inches away from any fittings.
