What does aluminium bar 5052 mean?
A material model whose contents are as follows:I. Introduction of 5052- H34 aluminium plate5052 aluminum plate belongs to the aluminum magnesium alloy aluminum plate, the use scope is widespread, especially in the construction industry cannot leave the alloy aluminum plate, also is the most promising aluminum alloy plate. The main alloy element of 5052 aluminum plate is magnesium, which has good corrosion resistance, good weldability, cold workability and medium strength.Two, 5052-, H34 aluminum plate range of application5052 aluminum plate is commonly used in the manufacture of aircraft and car fuel tanks, oil pipes, as well as traffic vehicles, ships sheet metal parts, instruments, street lamps, brackets and rivets, hardware, electrical appliances, such as shell.
Seven, 5052-, H34 aluminum plate series and 1060 Aluminum plate series differenceHardness: 1060, the tensile strength of aluminum plate is between 110-130, while the tensile strength of the 5052 series is 210-230, that is to say, 5052 of the hardness must be 1060 of the response, 100% higher.Elongation: 1060 series of elongation rate of 5%, while the 5052 series of elongation reached 12-16% between, can also think so, in the 5052 series than 1060 hard 100% cases, the elongation rate has increased by about 200%.Chemical property: 1060 is pure aluminium plate, 5052 is alloy aluminium plate, 5052 corrosion resistance is better in special environment.Eight, relevant product standardsNational standard for aluminum strip (GB/T 3880-2006), applicable to the uniform standards of aluminum alloy sheet and strip materials. StopDu know who cited "Hondar Sheng 252" was released on 2017-01-08 16:43 | wonderful answer comment 0
Three, 5052-, H34 aluminum chemical composition:Aluminum Al: margin; silicon Si:0.25;Copper Cu:0.10; magnesium Mg:2.2 ~ 2.8;Zinc Zn:0.10; manganese Mn:0.10;Chromium Cr:0.15 ~ 0.35; iron Fe:0.4 0.Mechanical properties of four, 5052-, H34 aluminum plateTensile strength B MPa (170~305)Conditional yield strength (MPa = 65) 0.2Modulus of elasticity: E 69.3 ~ 70.7GpaThe annealing temperature is 345 DEG C.Surface quality of five, 5052- H34 aluminium plate1, the surface does not allow cracks, corrosion spots and trace nitrate.2, on the surface is allowed to have a depth of no more than the defect location of wall thickness of nominal size 8% peeling, bubble, surface rough and local mechanical damage, but the defects of the maximum depth of not more than 0.5mm, the total defect area of not more than 5% of the total area of the plate.3, allow the supplier to polish the smooth surface along the longitudinal profile.4 other requirements: the demand side and the supplier to develop their own.Six, 5052-, H34 aluminum welding electrode model5052 aluminum plate can be welded with ER5356 welding rod. After welding, the mechanical properties of the 5052 aluminum sheets can be met. 5356 of the chemical composition: Si:0.25; Fe:0.40; Cu:0.10; Mn:0.05-0.20; Mg:4.5-5.6; Cu:0.02--0.20; Zn:0.10- 0.20; Ti:0.06--0.20; Al: margin; 5336 higher magnesium content.
