Home > categories > Sports & Entertainment > Tents > What if the inflatable tent leaks?
Question:

What if the inflatable tent leaks?

What if the inflatable tent leaks?

Answer:

Tools needed: air column fabric, special glue for manufacturer. If the leak point is a very small hole, can use a small piece of cloth (jattu gas column Zhuo any specifications of the inflatable tent there are standard), then brush the glue dry after dispensing, to be affixed to the leak, tight bonding. If the leakage of gas column joints for sealing plastic, can be divided into the following steps:First, clean the bonding surface first.Two, the inflatable tents will be given a bottle of glue, inflatable tent column special glue, brush it on the surface of the pre bonding surface, and must be painted evenly, the thickness is appropriate, brush two times, you can glue.Three, sticky interface shape must be designed as round or oval, as far as possible avoid square and sharp angle interface shape, lap width shall not be less than 30mm.Four. When the glue has been volatilized, it can be bonded. The patch shall be flat, free of wrinkles, rolled and scraped. At the same time, the hair dryer is supplied with heat source to facilitate bonding. 6 hours after bonding, it can be inflated. (Note: glue and air column can not fill the leak. The glue must be dried before it can be adhered. The time is about 10-20 minutes.)
When the leak point is very large and the diameter is more than 15 centimeters, you can repair it temporarily with the above method. When you have free time in the inflatable tent, you can return it to the factory for free maintenance, so as to ensure the quality of the inflatable tent!
First, wipe the gas column clean, and then smear the surface with soapy water to check the leak point.Two, find a quiet place (best at night), gas filled, and then around the inflatable tent quietly listen to a circle, will hear the sound of leakage, and then find the root.

Share to: