LED is usually the lead pins form, need to be drilled on the printed circuit board, the LED pin is inserted in the hole, welded with wave soldering machine; and the patch type LED is used in welding surface, flat welded on the circuit board.
Patch LED refers to surface mount LED.The LED is separated from the PCB board in the form of inline and surface mount. Piranha, 3mm lights, and 5mm lights are all pins. While most high-power LED is surface mount, that is, patches. Small power LED also has the form of surface mount such as PLCC-2 and PLCC-4.
LED lights, a common model, has 34654635285050 piranha.The most common assembly of lights and PCB boards is the DIP, that is, dual in line and SMT surface mount technology two.The 346546 is the LED with two positive and negative pins, which are inserted into the PCB board after cutting the foot;3528 and 5050 are a cube with 3 LED lights inside, known as the "three in one" LED lamp. It has no pin underneath, but has a metal patch that can be passed through the reflow soldering machine through the solder to the PCB board.General indoor LED screen with more patches, outdoor screen with more pins.
Patch element. Very small, no pins, soldered directly to the circuit board. For example, the keyboard lights in a mobile phone are used in this way.
